Cool Mario Poster created in HueForge.
This is a FIVE color print - you will need to manually swap out the Black with White in the AMS once the black layers are completed.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Creality Black
Bambu Red
Bambu Yellow
Bambu White
Bambu Matte Ice Blue
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Ice Blue
At layer #10 (0.88mm) swap to Yellow
At layer #14 (1.20mm) swap to Red
At layer #17 (1.44mm) swap to Ice Blue
At layer #19 (1.60mm) swap to Yellow
At layer #20 (1.68mm) swap to White ---------→ Important! Make sure after black finishes it's layers, physically swap it out with White in the AMS