Watertight Repurposed Glass Bottle Vase

_______________________________________________

About:

Using as little as 32 grams of filament you can make a full size, decorative watertight vase. Works with twist off and pry off cap glass soda and beer bottles. Choose what style vase you want, from 2 to 16 spiral. Print it. Screw in the twist top or just push in the pry off cap glass bottle. Add water. Add flowers. Enjoy.

Add some decorative LED lights around the bottle to really delight.

____________________________________________

Steps To Print:

1. Print
   1. you may need to rotate 180 degrees if you import stl. so it prints right side up
2. Remove brim
3. Screw in twist top bottle
4. If it had a pry off bottle cap, just push until it snaps in place
5. If it seems a little too tight or loose, scale slightly in the X,Y directions

____________________________________________

Dimensions + Print Time + Filament Used:

• 250mm Tall
• Print Time from 2h9m to 4h15min
• Filament used from 32 to 118 grams

____________________________________________

Settings:

• Layer height: 0.28mm
• Walls: 2
• Top shell layers: 2
• Bottom shell layers: 2
• Infill: 0%
• Inside brim for a little extra hold
• No Supports

_____________________________________________

Extra:

More Cool Prints:mwiller | Published - MakerWorld