Camera mount on bed for A1

Remixed by

Camera mount on bed for A1

Remixed by
Boost
4
6
0

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
1.3 h
1 plate

Boost
4
6
0
1
4
4
Released

Description

Camera mount based on Pivot Pro of Xander Designs and Bambu A1 bed handle from mlodybuk.

 

You need follow the Xander Designs tutorial to move the camera.

 

The anchor to bed allows to see better the bed on the first layer and to make “coreXY like” timelapses using the built in "video recorder" not the “timelapse" so the printer get no pauses/purgetowers/etc. Get the videos from ipcam folder inside the SD. The option its available in Settings→ Camera options → Video, you get the “rec” icon on top on printing details page, care with the free space on the microSD, the old videos are deleted when the SD have more than 85% occupied (like a security cam).  Use a video editor to speed up and get the model in the middle and only the printer and background moves.

 

Print in diagonal its recomended to obtain the best strenght/weight ratio (designer print profile). Due to the strange position, the supports are not so easy to remove, be careful not to break the pivot.

 

You need a m3x12 screw, easy to find

 

PASS THE CABLE INSIDE THE SCREEN GAP. CHECK ALL THE BED MOVEMENTS TO AVOID THE MOVING BED PULL THE WIRES (its a fast beslinger). Move the screen to beter clearance.

 

Disclaimer. You are adding ~30 grams to one corner of the bed; calibrate after installation. If you are using screen protectors, check for collisions first. I am not responsible for camera malfunction

 

 

 

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more