日产车钥匙外壳改版，钥匙保护套，上一代的改版，接缝改在穿绳孔处，增加卡扣卡住绳孔不会脱落，增加支撑打印更方便，打印时正面朝下薄弱地方已经添加支撑最好再加一层底缘，超薄前后镂空小巧轻便，包含钥匙简模可以用来做外壳设计哦，适当放大打印（101或102%），打印时候慢一些，层高0.1/0.15，越细腻越好看，tpu pla petg都可以碳纤维就更漂亮了，推荐petg透明料。日产4按钮3按钮通用。一代https://makerworld.com/zh/models/41654#profileId-42046

Nissan car key shell revision, key protection sleeve, the previous generation of revision, the seam changed in the rope hole, increase the buckle stuck rope hole will not fall off, increase support printing more convenient, printing face down weak places have been added support is best to add a layer of bottom edge, ultra-thin hollow before and after small and lightweight, including key simple mold can be used to do shell design oh, Appropriate magnifying printing (101 or 102%), printing time is slower, the height is 0.1/0.15, the more delicate and the more beautiful, tpu pla petg can be more beautiful carbon fiber, petg transparent material is recommended. Nissan 4 button 3 button universal. generation：https://makerworld.com/zh/models/41654#profileId-42046