Bird Lamp by wuguigui

wuguigui

Household>Decor

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

Bird Lamp all parts

Designer

22.7 h

8 plates

5.0(12)

Bird Lamp Button-2colors

Designer

1.4 h

1 plate

Precize A1 Mini Version - All Parts - 0.16mm layer

27.2 h

8 plates

5.0(2)

0.2mm layer, 2 walls, 15% infill

14.2 h

4 plates

Boost

627

746

605

Released

Description

Updated 20240526

Good news! Many people complained about the light leak issue of the shell printed by PLA-matte filaments. Now I designed a new LED holder that combined with a light hood, can prevent light leakage effectively, you just need to print the new LED holder part(LED Holder 3.1) to replace the old one, and then you can have a perfect light effect. Assembly Instructions and Print Profile updated as well. Thank you for your boosting and support.

_________________________________________________________________________________________________________________

Disclaimer: This model is part of the Creator Program, When you purchase the hardware kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

This is a bird lamp designed for Bambu LED Lamp Kit 001(This link is Bambu store Global area), you can buy it from the “Bill of Materials” at the bottom of the page if you are not from the “Global” area, it's available in the Bambu Store worldwide.

Recommended filaments: Body: BambuLab PLA-CF (good at shading lights)or BambuLab PLA-matte( Vivid colors), you can also try other Bambu Filaments; The Joint parts must use TPU, I'm using BambuLab TPU95A HF in this case.

This model is original from my design in 2008(image below), at that time, it was hard for me to make it real in traditional ways, but now, I can do it with 3D printing:)

After 3 iterations and countless detail adjustments, I made this warm and lovely bird lamp finally. you can see some of the improvements in the images below.

(Modify the structure of the lamp holder to optimize the lighting effect)

(Modify the switch structure to avoid the impact of the support surface blocking switch travel, and covering the support surface)

(Elevate the overall height to achieve a more balanced proportion of the design)

Assembly Instructions:

The TPU Joint parts recommended printing infill is 80% to make it sturdy.

Click "Like" if you like it, feel free to boost me or buy me a cup of coffee, thank you! Have fun!

Watch the video to get more information:

Documentation (1)

Assembly Guide (1)

Assembly Instructions_1da5f7ca-1f85-4888-b462-4552c756f7e0.pdf

Bill of Materials

Bambu parts

LED Lamp Kit (1pcs)-001

MH001

× 1

Purchase from Bambu Store

(Available in China)

Comment & Rating (89)

@NiceCreate

Boosted

Print Profile

Bird Lamp all parts

Printed at 0.2 but with adaptive layer height. Used the coloring from my local soccer team and added there logo in the black side cover. Looks like a tropical bird. Colors used are Bambu Labs matte lemon yellow, matte grass green, matte dark red, matte charcoal black and matte ivory white All worked like a charm. Great design! Sending a boost.

(Edited)

The designer has replied

@wuguigui

The color looks great! Thank you for boost me.

(Edited)

@flytigeremail

masterpiece

(Edited)

@NiceCreate

Boosted

Printed a second one with fuzzy skin. This gives a different look and hides the layer lines. Seam is also less visible.

(Edited)

@Stibiac

Boosted

Print Profile

Bird Lamp all parts

I have some issues with the seams (see picture of red parts, Bambu PLA matte). Printed with your original profile. One seam is already sanded a little bit though. But that doesn't look nice :-(

(Edited)

The designer has replied

@wuguigui

yes, the seam is an issue that can not be fixed so far, so I put all the seams on the backside of the shell parts, looking forward to seeing your final lamp.

(Edited)

@Stibiac

Boosted

Replying to @wuguigui :

although I still rate your design five stars I have two more issues. According to your pictures the infill pattern is not to be seen in the white diffuser. Printing from your profile with Bambulab’s white matte it is here. Also, when the light is on, it shines through the colored PLA and does not look good because of the shadows cast by solid parts inside the head. How did you solve that?

@wuguigui

Replying to @Stibiac :

the first issue, I have a pattern too, because of the exposure setting, so in some pictures, the pattern is not clear, but my pattern is not the same as yours, maybe I didn't set the infill the same as I printed before, maybe infill 30%or40%. I think the pattern texture looks much more cool than just flat white.

@vince008

AMAZING !!!

The designer has replied

@wuguigui

Yes, the PLA basic and PLA matte will leak the lights out, but to me, it's acceptable, nice printing.

@NiceCreate

Boosted

Replying to @wuguigui :

Maybe a black inner shell would help with the light leak if there is room for it. Printed in a 1 layer vase mode. But even so, it's a nice print!

(Edited)

@wuguigui

Replying to @NiceCreate :

There is no space left so far, the top shell size is strict to the size of the LED kit001, if enlarge it, the whole body need to change as well, so... let me think about it.

@Guzet

Has anyone printed this on the mini yet? Mine constantly end up like this after first layer.

The designer has replied

@wuguigui

Are you using PLA-Matte? I always has such issue when printing PLA-matte in A1mini,so now I never print it on A1mini

@NiceCreate

Boosted

Printing it on the Mini. No problems so far but I used the smooth PEI sheet except for the TPU parts that I'm printing now. Bambu matte sticks really well on the smooth sheet. I also never used a brim and printed fine.

@Guzet

Replying to @wuguigui :

yeah it's actually the "muted" polyterra

@AliceDmaus

Boosted

Print Profile

Bird Lamp all parts

One of the greatest things ive ever printed. Thanks

The designer has replied

@wuguigui

It's cute :)

@kriswillcode

Boosted

This is so incredibly awesome! It printed easily and assembled perfectly. I really liked mixing materials in a single project: PLA for the body, TPU for the joints, and PETG for the light shield. Using TPU for the internal joints is simply brilliant! Thanks for the excellent model!