My first hueforge print :)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Leaf Green Transmission Distance: 2.5
PLA Light Gray Transmission Distance: 3
PLA White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Leaf Green
At layer #10 (0.88mm) swap to Light Gray
At layer #12 (1.04mm) swap to White for the rest.
Tips and tricks:
Commercial Use
This model is only available for non-commercial use, you can print it for yourself or as a gift for others, but you may not sell or alter the model. If you are interested in obtaining a commercial license please visit my Patreon store: https://patreon.com/noordinaryleaf