Custom Infill Spool Rack
Copyright Claim
Custom Infill Spool Rack
Boost
432
672
125
Print Profile(2)
0.25mm layer, 7 walls, 10% Honeycomb infill
Designer
1.6 h
1 plate
0.25mm layer, 7 walls, 7% Gyroid infill
Designer
1.2 h
1 plate
Open in Bambu Studio
Boost
432
672
125
49
679
488
Released
Description
This Spool Rack is the perfect addition to your 3d printing setup! Accepts a 1'' wooden dowel. The print profile allows you to choose your own infill pattern so that you can customize it to your specific style and needs! It is a fast print at only 1.5 hours on the p1s! If you are not using the print profiles provided, the way to achieve this effect is by removing all of the top and bottom layers, so that the infill will be exposed. I increased my wall count to about 7 to still have a strong part. No supports needed!
Comment & Rating (125)
All
Boosted
Print Profile
0.25mm layer, 7 walls, 10% Honeycomb infill
looks good so far it works just as good as it looks
The designer has replied
1
Reply
looks great! I really like that color choice!
0
Reply
metal tube work better than wood?
0
Reply
Boosted
Replying to @Dennis48858
dont know its what i had lying around in the garage
0
Reply
These printed out very nice, I used Gyroid infill just because. I think they turned out real nice. Going to pick up the rod later today and will mount soon after. Thanks for sharing this.
(Edited)
The designer has replied
2
Reply
Glad you like it! Looks great!!!
1
Reply
Print Profile
0.25mm layer, 7 walls, 10% Honeycomb infill
Very strong in PETG, nice to organise, thankyou!
The designer has replied
1
Reply
glad you liked it!
0
Reply
Boosted
Print Profile
0.25mm layer, 7 walls, 7% Gyroid infill
A whole lot stronger than they look! I always underestimate PETG's strength haha, and now my filament is finally organized!
The top holes gave me a whole heap of trouble but that may have been caused by the screws I bought.
For anyone wondering: I used #8x2" for the wall screws and #6x1.25" for the dowel screws
The designer has replied
1
Reply
glad it worked out for you!
0
Reply
Boosted
Thanks for a great design and helping me organize!
The designer has replied
1
Reply
Looks great! Glad i could help!
0
Reply
Print Profile
0.25mm layer, 7 walls, 10% Honeycomb infill
This was an amazing print! i have this hanging on a wall in my workshop!
(picture included is of the timelapse from the printer.
The designer has replied
1
Reply
glad it worked for you!
0
Reply
Print Profile
0.25mm layer, 7 walls, 10% Honeycomb infill
2 of 3 printed perfect, unsure what happened with the 3rd, but 100% not gonna blame it on the model.
The designer has replied
1
Reply
Glad you like it! The 3rd one looks like it had a bed adhesion issue. it must have warped and disconnected from the bed, but the others look great!
(Edited)1
Reply
Print Profile
0.25mm layer, 7 walls, 10% Honeycomb infill
Printed in PLA+ for some added strength but the model doesn’t really need it. Printed perfectly, can’t wait to get my filaments off the table and hung up. Thank you for offering!
(Edited)
The designer has replied
1
Reply
thank you, glad you like it!
(Edited)1
Reply
Print Profile
0.25mm layer, 7 walls, 10% Honeycomb infill
nickel
(Edited)
The designer has replied
1
Reply
looks great! are there any changes that need to happen for it to be a five star experience?
0
Reply
Boosted
Print Profile
0.25mm layer, 7 walls, 10% Honeycomb infill
works good, strong , would give 5 but it wont let me , clearly it printed fine and completed. sorry for the 3 star. makerworld needs to fix this bs
The designer has replied
1
Reply
looks great! yeah, that’s a weird bug.
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld