Thanks for visiting!

Trying different variations of flags and this is the Chinese one. Hope you enjoy.

They come out fairly thick so it has a nice feel to it.

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

Print at 15% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
pla Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA White Transmission Distance: 6


Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to White for the rest.