Coffee mug spill bookmark - Matcha, coffee, tea...

Copyright Claim

Coffee mug spill bookmark - Matcha, coffee, tea...

Boost
255
485
34

Print Profile(4)

All
A1 mini
A1
P1S
P1P
X1
X1 Carbon
X1E

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
Designer
1.3 h
1 plate
4.0(13)

x10 Coffee Mug Bookmarks 0.2mm nozzle, 0.06mm layer
x10 Coffee Mug Bookmarks 0.2mm nozzle, 0.06mm layer
Designer
7.1 h
2 plates

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
Designer
18.1 h
1 plate

0.4mm Nozzle, HQ Profile, 0.08mm layer, 2 walls, 15% infill
0.4mm Nozzle, HQ Profile, 0.08mm layer, 2 walls, 15% infill
47 min
1 plate
4.6(14)

Open in Bambu Studio
Boost
255
485
34
8
295
217
Released

Description

Save your place in a book with this cozy coffee spill bookmark! This cute bookmark can be changed to different liquid by changing the color of the spill in the model. Want Matcha? Change the color to green. Want tea? Try a lighter brown.

 

The model is printed in two pieces to reduce filament waste and allow printing by non-AMS 3d printers. print the pieces separately then press fit the spill into the coffee mug. Be careful because the spill can be fragile around the transition from cup to spill. The support removal is also a delicate process. I recommend using knippers.

 

Print profile now available in a single multi-color print if desired. Time and waste is greatly increased so I recommend printing multiple if you prefer to print as a single multi-color print to reduce the waste per bookmark. 

Comment & Rating (34)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
A very nice idea and well-made project. The bookmark fits snugly in the cup, but being very delicate, it risks breaking, I recommend a drop of Attack inside the cup to lubricate and permanently glue the two pieces.
The designer has replied
Show original
0
Reply
Grazie mille
0
Reply
was unable to press fit the spill into the cup( this transition is too fragile. The spill is also very thick dot a bookmark ((
The designer has replied
0
Reply
The spill is a tight fit to the coffee, I use a q-tip to push down the spill into the coffee cup. I added a multi-color print if you prefer to print as one piece. The print time and waste is greatly increased though.
0
Reply
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
It didn't come out perfectly, but it's fantastic
The designer has replied
0
Reply
I'm glad it worked out for you. It's a delicate balance between being small enough to fit most books and be super cute but also big enough to be able to print.
1
Reply
Print Profile
0.4mm Nozzle, HQ Profile, 0.08mm layer, 2 walls, 15% infill
came out nicely
0
Reply
Print Profile
0.4mm Nozzle, HQ Profile, 0.08mm layer, 2 walls, 15% infill
0.2 nozzle, perfect print
0
Reply
Print Profile
0.4mm Nozzle, HQ Profile, 0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.4mm Nozzle, HQ Profile, 0.08mm layer, 2 walls, 15% infill
very cute, but the spill part bent and snapped easily when trying to fit the insert into the mug. will try it again.
0
Reply
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
great for my books
0
Reply
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
nice design
0
Reply
Print Profile
0.4mm Nozzle, HQ Profile, 0.08mm layer, 2 walls, 15% infill
Used a .4mm nozzle and worked great
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.