建议使用0.2MM喷嘴打印,效果更加,如若需要使用0.4,放大打印效果会更好。
推荐使用拓竹原厂材料已达到最好效果。
It is recommended to use 0.2MM nozzle for printing, the effect will be better.
If you need to use 0.4, the enlarged printing effect will be better.It is recommended to use Tuozhu original materials to achieve the best results.
底座模式可以当做小摆件使用。The base mode can be used as a small ornament.
也可以装配到KAME HOUSE上