Ah, greetings, esteemed Vault dweller! Welcome to the marvels of RobCo technology, where innovation meets reliability. As the creator of the iconic computer terminal you now stand before, let me regale you with tales of its wondrous capabilities. Picture a machine crafted with precision and care, adorned with sleek buttons and glowing screens that beckon you to explore the depths of its digital domain. Within these electronic confines lie the keys to unlocking the secrets of the post-apocalyptic world you find yourself in. From accessing vital information about your surroundings to unraveling the mysteries of the past, our terminals stand as beacons of knowledge in a world shrouded in uncertainty. So, step forth with confidence, dear dweller, and embrace the power that lies at your fingertips. With RobCo by your side, the possibilities are as limitless as the wasteland itself!
Necessary Supplies
Special Consideration When Printing
When printing with .2mm nozzles slow your print speeds down. I am printing with a slightly modified Ender 3 S1 that I have converted to run on Klipper. If you also are using Klipper I have found the most success slowing down the print speed from within Klipper instead of at the slicer. Somewhere between 60% and 80% has been best for me. If you are getting excessive stringing try drying your filament before printing. The only parts that require supports are the “Side” pieces. If you are looking for a clean screen you could print that face down with supports on but I found that on its back and using ironing gave me a result I was happy with which is what is pictured above.
Post Processing
Rub N Buff is a product where a little bit goes a long way. I strongly suggest you print one or two extra “Keyboard” pieces and “Side” pieces to test on. Make certain you burn any stringing prior to using Rub N Buff. I have found it easiest to use the Rub N Buff prior to assembly. The brushes that are linked above gave me the brushed metal look that I was going for. Other items you can use to apply are sponges, microfiber clothe, etc.
Assembly
2. Next adhere the screen to the backing while lining up the bottom edge of the screen and the top edge of the keyboard.
3. Lastly slide the assembly thus far into the space of the outer frame starting at the back.
I hope that you are able to find enjoyment in this project as I have! Please do not hesitate to ask any questions, I will do my best to answer them and in a timely manner.