Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #7 (0.64mm) swap to Charcoal
At layer #15 (1.28mm) swap to Brown
At layer #22 (1.84mm) swap to Mandarin Orange
At layer #26 (2.16mm) swap to Jade White for the rest.

Se puede escalar en tamaño siempre respetando la altura en Z