All the designs i upload, i have to print first, and that's a lot of filament 😬 And filament isn't free..

So, if you like my work you could

buy me a coffee if you like. 😉

https://www.buymeacoffee.com/a.vdh_83

Or a donation via Paypal is also much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BumbuLab Matte Charcoal Transmission Distance: 0
PLA BambuLab Basic Red Transmission Distance: 4.8
PLA BambuLab Basic Yellow Transmission Distance: 4
PLA BambuLab White Transmission Distance: 9.6

Swap Instructions:
Start with Matte Charcoal
At layer #12 (1.04mm) swap to Red
At layer #17 (1.44mm) swap to Yellow
At layer #20 (1.68mm) swap to White for the rest.