Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:

Start with Black
At layer #9 (0.8mm) swap to Red
At layer #17 (1.44mm) swap to BambuLab Green
At layer #22 (1.84mm) swap to Jade White for the rest.