Search models, users, collections, and posts
The Deburring Tool
IP Report
Print Profile(3)
0.15mm layer, 3 walls, 15% infill
Designer
2 h
1 plate
All Bambu Printers - 0.15mm layer, 3 walls, 15% infill
2.3 h
1 plate
Holder for The Debburing Tool - PLA
37 min
1 plate
Open in Bambu Studio
Boost
222
480
98
59
722
478
Released
Description
I developped this deburring tool: a small, easy-to-print tool that's incredibly practical.
INSTALLATION:
- Place the small bit holder inside the head cap.
- Tighten the head cap halfway.
- Insert the deburring bit and slide it back and forth until it's properly positioned.
- Fully tighten the head cap to secure the deburring bit in place.
REMOVE IT:
- Fully unscrew the head cap.
- Push the deburring bit into the head cap, then detach the bit holder located at the rear of the cap.
- With the bit holder removed, the deburring bit can be easily taken out.
BENEFITS:
- Designed for FDM Printing
- No Support
- Smooth Operation
Boost Me (for free)
Thank you for your support of my work!
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (98)