Print Profile is good. Numakers was used for this print and all my others. Works great in the ams and you can pick it up for a great price. Use this link for a discount on your first order. https://numakers.com/?ref=09v0k1co
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.8mm and the Actual Depth is 2.9mm
Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 1.6
PLA+ Numakers Dark Gray Transmission Distance: 4.8
PLA+ Numakers Nuclear Red Transmission Distance: 4.8
PLA+ Numakers Pure White Transmission Distance: 4.8
This print uses 4 unique filaments
Swap Instructions:
Start with Pitch Black
At layer #6 (0.56mm) swap to Dark Gray
At layer #9 (0.8mm) swap to Pitch Black
At layer #11 (0.96mm) swap to Nuclear Red
At layer #12 (1.04mm) swap to Pure White
At layer #22 (1.84mm) swap to Nuclear Red
At layer #29 (2.4mm) swap to Pure White for the rest.