Print out amazing looking infill based decorations or ornaments with (almost) any design!

Made entirely inside of Prusaslicer. Designed for the 2023 Holiday Decorations and
Necklaces and Pendants contests

To print one of these simply load in one of the provided base models or your own design, set the top and bottom horizontal shells to be zero and choose whatever infill pattern you want. Or just download an open a .3mf file as a project in Prusaslicer, and change out the design with whatever you want, change it to match your printer profile, just remember to hit transfer settings when doing so.

If you want to make your own design, flatter models tend to work better as it uses less material and shows off the infill better by still allowing light to shine through. Less dense infill patterns also generally look better especially when viewed from a distance but this also depends on the infill pattern you’re using. It’s also possible to create custom infill patterns using SVG files.

To wear the design as a necklace or earring, simply pass a thread through the provided loop in the model (if present) or through a gap in the infill pattern and use the thread to attach it to your necklace or earring, or to tie it to something to hang as an ornament. I recommend using a thin fishing line as these aren’t very heavy and it can easily pass through small holes but please experiment and find something you like.

Pictured above are several examples/test prints that I did also including a banana for scale.

Have fun!