This is a remix of Luocheng Huang's Gridfinity Watch Stand, which I modified to fit a 1x2 Gridfinity Watch case I designed to hold one watch. I had to move the watch holder rearwards several mm to fit the watch and holder in my 1x2 case. A hex pattern was also added to the medium size watch holder.

There are 2 versions:

Gridfinity_Watch _V7H _Large.stl

Gridfinity_Watch _V7G _Medium.stl

The medium is the same size as the original Gridfinity Watch Stand which this was remixed from. The large version was scaled up about 125%, since my watch bands did not fit the medium size holder.

I designed this to be used with the following 1x2 Gridfinity 12U Watch Case, but it can be used with any Gridfinity system:

https://makerworld.com/en/models/450801#profileId-357811

A 3MF profile is included with all three versions on one plate (remove the ones you don't need to print). The profile is set up with the following settings:

• PLA for all parts
• 0.4mm X1 Carbon profile
• 2 Walls
• Arachne wall generator
• inner/outer/inner for the wall ordering
• 15% 3D Honeycomb infill
• Tree Supports (required)
• Textured PEI build plate

AMS is not required, but here is how it is set up in the profile:
1 = PETG- Orange
2 = PLA - White
3 = PLA - Dark Blue
4 = PLA - Gray
5 = TPU - Black (this is the non-AMS spool on the back)

I printed this using PolyMaker Galaxy Blue Polylite PLA.

If you find these models useful, please post a like or a comment with some pics of your prints.

You can find the other things I'm working on at my blog here. You can also follow me here on Printables to see what new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!