Manual crank for the Pastamatic Filament Spool Winder
Pastamatic - Filament Spool Winder Bambu Lab X1C/P1P AMS
Differences in comparison to other similar projects:
I separated the axle of the handle from the crank and added one axis of freedom and the possibility of replacing this element. Also, I want to have texture on the handle surface.
Protection rings could be blocked by 1.75 mm filament pieces.
Three versions of base:
HPaC-01V1-base-simple -simple with a protection ring -could be used in another similar project
with the label "Past@matiC" (HPaC-01V2-base) and without (HPaC-01V3-base-without-label)
Printing:
I used PLA for rings, and other components were printed using PETG.
However, I recommend PETG only for the axle and axis components, others could be prepared using PLA.