This is a remix of Spinodal_Zeugma's Arkham Horror LCG: Card Storage Trays for New Game Box Size. This is a storage solution that fits exactly into the new core box or any campaign expansion box. It needs to be printed 2x times for both sides. Afterwards the middle part can be filled with the storage boxes from the same author [1].

Both parts are fully rebuilt in Fusion 360, with the following changes/improvements:

1. The front part now also has slots to put dividers. In the original model only the tray end had these slots.
2. The slots to put the dividers was (in my opinion) in the wrong direction. So I changed the angle, to be in line with the front angled part.
3. The front part has an angled part which was not the same angle as the slots for the dividers. So, I made a new front which has the same angle (76 degrees), which improves storage space.
4. I removed some material from the bottom that is not really needed, so save some filament.

[1] https://www.printables.com/model/843055-arkham-horror-lcg-box-trays-fitted-to-encounter-de