Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.1
    PLA BambuLab Basic Blue Gray Transmission Distance: 2.3
    PLA BambuLab Basic Gray Transmission Distance: 0.1
    PETG JAYO White Transmission Distance: 6
This print uses 4 unique filaments

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
    Start with Black
    At layer #12 (0.6mm) swap to Blue Gray
    At layer #16 (0.76mm) swap to Gray
    At layer #22 (1mm) swap to White for the rest.