Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA Sunlu Meta Black Transmission Distance: 1.2
    PLA Sunlu Meta Grey Transmission Distance: 3.5
    PLA Overture Light Gray Transmission Distance: 0.7
    PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Grey
    At layer #18 (1.52mm) swap to Light Gray
    At layer #20 (1.68mm) swap to Jade White for the rest.