Articulated Scorpion by Maty505

Maty505

Art>Sculptures

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Single Color, 0.2mm layer, 2 walls, 15% gyroid infill

1.8 h

1 plate

4.0(3)

Boost

Released

Description

As always, this model is prescaled and i do not recommend scaling down unless you use a 0,2mm nozzle. The full size scorpion is about 30 grams. I have printed mine from copper silk pla+ on stock ender 3 with 0,4mm nozzle and it turned out great. The orange one was a bit scaled down and printed from prusament petg, that one didnt tun out that great but i think thats my mistake as i was printing petg for first time. Im also working on another version that will be suitable for even smaller prints taht will be released in a few days.

Comment & Rating (6)

@Brithawkes

Print Profile

Single Color, 0.2mm layer, 2 walls, 15% gyroid infill

Great model thanks

@EthanB37

Boosted

Awesome model you made! No problems in printing, and the joints work great. Also, I don't know if this was on purpose, but it is sized perfectly to fit on the A1 mini! Any bigger and it would not fit. I added a print profile that uses PLA in a single color. Thanks for the model!

@user_1113899827

Print Profile

Single Color, 0.2mm layer, 2 walls, 15% gyroid infill

didn't work but will try again, filament not sticking and layer lifting.

The designer has replied

@EthanB37

Boosted

Sorry to hear it lifted up with using my profile. As you probably already know, cleaning the plate with soap and water might help with first layer adhesion. I also printed this with bambu branded filament which I have found better than my other filament I have. Adding a brim would probably help also, but I haven’t tested it with a brim. I’m not a printing expert, but increasing initial layer bed temp to 65 degrees if it isn’t already there may help as well.

@user_1113899827

Replying to @EthanB37 :

I've just washed it ,thanks for the tip,I'm a complete Newby to this but find it fascinating to watch it printing 😁, will have another go , thank you 😊