Small Corner Locker by Piddey

Piddey

Household>Other House Models

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

10.3 h

3 plates

Open in Bambu Studio

Boost

Released

Description

Summary

A small corner locker to keep things away from my daughter's prying eyes.

It can for sure also serve for other usages.

The holes are 2mm in diameter, so finding some matching screws should be easy. Screw length is 10mm.

To install the door to open to the other side, just swap the bottom and top plate plus the left and right 'front wall'

The lock used is a universal mailbox lock.

Comment & Rating (2)

@moestone

this is neat, great work, but if i may suggest 2.9mm/3mm holes for M3 screws, that size if very common for 3d printing hobbyists, the M2 size is much harder to find. let me know if you make M3.

The designer has replied

@Piddey

This was a very early project, so at that point I didn't know much about 3D printing and parts and stuff. I'll see what I can do, but I can't tell when till when I can provide the modified version. Thanks for your input!

(Edited)

No more