** If you enjoy this free model and want more, please consider Buying Me A Coffee. ** 

One of my first book nooks made in 2017. Prints in 4 main parts. No supports needed. 

Paint and add details to build your own little medieval alleyway on your book shelf.

You will need to purchase:

 (Everything is 2 wires, positive/negative and easy to wire. No soldering required. Simply group all pos/neg wires and connect to the terminal.)

•  Mirror that is 8.5"x3" (a local glass shop will do this for you in minutes) 
•  5.5x2.1 female terminal(2-wire) ( https://www.amazon.com/dp/B0CPHJMW47 )
•  Square on/off rocker switch(2 wire) ( https://www.amazon.com/dp/B0B6R9KFRT )
•  LED lights of your choice. Good start here: ( https://www.amazon.com/dp/B07T8GSCKT )
•  9v power supply ( https://www.amazon.com/dp/B00191WVF6 )
•  clear PLA for the windows

**Very basic instructions. This is not a step by step finished print, but a foundation for you to create what you want:

-Paint, decorate, and wire each side to your liking. There are places for the signs and where the led lights for the lanterns pass through next to the doors. Glue each side together when done. 

-Glue the windows into place from the back and hotglue led lights to shine through them when the case is closed up.

-Paint the outer case and glue the 2 together. Slide the inside walls into the outer case. 

-Place mirror behind and hot glue it into place. 

-Finish wiring using the on/off switch and terminal. 

-Screw the backplate on.

-Glue the top plate on.

** If you enjoy this free model and want more, please consider Buying Me A Coffee. **