Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 225x126.56mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black 10101 Transmission Distance: 0.4
PLA BambuLab Basic Cyan 10603 Transmission Distance: 4.4
PLA BambuLab Basic Purple 10700 Transmission Distance: 2.2
PLA BambuLab Basic Jade White 10100 Transmission Distance: 16
This print uses 4 unique filaments
Swap Instructions:
Start with Black 10101
At layer #9 (0.84mm) swap to Cyan 10603
At layer #12 (1.08mm) swap to Purple 10700
At layer #19 (1.64mm) swap to Jade White 10100
At layer #28 (2.36mm) swap to Black 10101 for the rest.