Cy-Bea

cover

photo_2024-04-30_20-47-25_0052056f-1a17-469f-adf6-2f7f2e6754b6.jpg

photo_2024-04-30_20-47-28_141fdc7a-a05d-4390-b18c-0dc3b88fbb36.jpg

photo_2024-04-30_21-03-17_60ad4d51-e112-418d-a475-c9eb6ff5d6d6.jpg

plate_1.png

photo_2024-04-30_20-42-10_6e90f251-d7bf-42fb-bb70-220de13c6077.webp

plate_1.webp

0.2mm layer, 2 walls, 15% infill

Kbfly

20240502_010923_73128c39-5c70-4ae6-9f78-d284a0fcec14.webp

.2mm painted!&nbsp;ready to printpainted the wiskers and eyesblack&nbsp;yellow&nbsp;gray&nbsp;white&nbsp;

.16mm layer, 2 walls, 20% infill

user_2393721910

20241110_162958.jpg

20241110_155707.jpg

I used flashforge burnt titanium(as I barely have any black) for the eyes, blue for the iris, white for the body and pupil, and pink for the nose.

0.12mm layer, 2 walls, 15% infill Multi-Color

user_1878497239

PXL_20240615_014217315_fe597401-f56d-4dd7-9902-79c5fd0541da.webp

PXL_20240615_015211832_2a2d0df8-d326-418d-98a4-e4404405a6aa.webp

PXL_20240615_015219968_78c61a92-f8b4-49a9-b484-1fcf196703bd.webp

PXL_20240615_015248943_010bb33d-1526-4b22-a17c-29fddba0a325.webp

女兒很喜歡，印了不同色。原先由黑貓原檔修改放大，並用bambu studio內建的塗色塗改了白貓與紅貓，但白貓列印出來後發現，<ol><li>塗色不完整，又沒檢查切片，會導致頻繁換色</li><li>眼球處的輪廓小缺陷</li><li>沖刷到填充，白色層厚不夠蓋不過</li></ol>重新塗改了紅色，眼睛部分還是有點缺陷，但比白色好多了，供參考。

My daughter really likes it, and we printed it in different colors.Originally, I modified and enlarged the black cat file, and used the built-in coloring tool in Bambu Studio to paint the white cat and red cat, but after printing the white cat, I found that, <ol><li>the coloring was incomplete, and I didn't check the slicing, which caused frequent color changes</li><li>there were small defects in the outline of the eyeballs</li><li>the color bled into the infill, and the white layer wasn't thick enough to cover it</li></ol>I repainted the red cat, and the eyes still have some defects, but it's much better than the white cat. For your reference.

0.16mm layer, 2 walls, 20% infill

plate_2.png

plate_3.png

Creef412

20241124_113257.jpg

20241124_113322.jpg

20241124_113339.jpg

20241124_113352.jpg

Pre-painted all 3 cats on individual plates to print on a single AMS matching the creators sample color schemes.&nbsp;Black cat, Yellow/Black/White eyes, White whiskers and mouthOrange cat, Yellow/Black/White eyes, Black Whiskers and mouthWhite cat, Blue/Black/White eyes, Black Whiskers and mouth&nbsp;0.2mm layer, 2 walls, 15% gyroid infill, Original size

3 Painted Cats, AMS,0.2mm layer, 2 walls, 15% infill

yoloson.exe

the council shall now decide your fate.jpg

The council shall now decide your fate :D One-color kitty, extra small (70% size), full plate (9 pieces per plate). I consider 70% the perfect size to give to a group of friends as gifts or to use as board game pieces. The details at this size can still be painted with a fine brush. I tested it with Orange Basic PLA on the P1S.

9x 70% size, 0.2mm layer,2 walls,15% infill

very easy print! I colored it with acrylic pens

Kitty cat

ASIA

Print Profile(6)

Description

Comment & Rating (211)

License

Related Models