Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 140.85x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA PolyTerra Pastel Banana Transmission Distance: 3.5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #14 (1.2mm) swap to Pastel Banana
At layer #18 (1.52mm) swap to White for the rest.
Remember if you sant to scale, do it only with x and y axis, z must be the same as original.