flexi lizard
Copyright Claim
flexi lizard
Boost
441
765
188
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
6.2 h
1 plate
![[Fast+Clean] 0.2mm layer, 2 walls, 10% gyroid infill](https://makerworld.bblmw.com/makerworld/model/USb13faf0559beef/73028678/instance/2024-04-30_0c40aeb4f322.jpeg?image_process=resize,w_100/format,webp)
[Fast+Clean] 0.2mm layer, 2 walls, 10% gyroid infill
3.1 h
1 plate
1x - 0.2mm layer, 2 walls, 15% infill
3.3 h
1 plate
Boost
441
765
188
12
1.2 k
1.8 k
Released
Description
this is my print-in-place flexi lizard design I hope you like it
Comment & Rating (188)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
printed these in TPU, didn’t expect the print in place joints to print well, the whole model printed perfect in TPU.
(Edited)
The designer has replied
0
Reply
Great work now i need to try print my lizards in tpu
0
Reply
How long did it take?
0
Reply
unfortunately problems twice in the same place with two different materials. what is wrong
1
Reply
The print profile is no longer public
very good file
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Hat sich sehr gut drucken lassen, habe nur das infill angepasst 💪🏼
A1
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Prints pretty well, just needed to add a brim to mine, as some parts kept unsticking on my A1 mini. Was a pain to remove afterwards. However, most likely I did not clean my print bed as much as I should have, as not I don't have any warping issues, even when printing without a brim.
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Very Nice!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
👍
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
very good print!!!
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great Model. Easy to Print
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed both in PLA and TPU. Both printed perfectly.
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoDerivativesRelated Models
© 2024 MakerWorld