Corinth Ring by Pork3D.com by Pork3D

Pork3D

Fashion>Rings

Print Profile(2)

All

X1E

P1S

P1P

X1 Carbon

A1 mini

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

Designer

1.2 h

1 plate

4.5(15)

[.4 nozzle]: 0.2mm layer, 3 walls, 35% infill

20 min

1 plate

5.0(4)

Open in Bambu Studio

Boost

189

302

343

157

Released

Description

Corinth Ring

Add a touch of luxury to your everyday with the Corinth Ring! This geometric patterned ring exudes grace and refinement, making it perfect for anyone who appreciates a touch of sophistication.

Features:

Round shape with a geometric pattern

Intricate details and symmetrical design

Printing
No supports needed

0.2mm Nozzle

Comment & Rating (28)

@baakebowler

Just picked received my .2mm nozzle today. this was the first thing I printed. pretty amazing!

@ksetdekov

very clean print

@CarloM

Very good design! Printed with 0.2 nozzle Smooth PEI plate. PLA Basic and PLA Matte

(Edited)

@ksetdekov

Print Profile

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

must be very careful, cleaned the table several times to get a perfect print. after that printed fine

@GM3DPrint

Print Profile

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

Bed Adhesion Issue:justjust a little thatthat adhesion but but no big big deal

@NYCHostage

Would this print well if I reduce the size by 30 percent ?

The designer has replied

@pork3D

Try it, should be able to tell by checking how it is sliced.

@NYCHostage

Replying to @pork3D :

I printed it at 65% scale. The print came out fine and quickly, but it was too small to fit on finger. Will try 75% scale.

@facelessfan

Print Profile

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

could not get good bed adhesion. I tried 4 times different settings. could just be human error on my part.

The designer has replied

@pork3D

Is your printer a bed slinger? I found a hotter bed and a super clean surface was needed.

@AiTeee

wich filament did you use for the fotoshoot?

The designer has replied

@pork3D

Just the pink matt PLA from Bambu.

@MikoCZ

Print Profile

[.4 nozzle]: 0.2mm layer, 3 walls, 35% infill

good

@gallegopo2000

Print Profile

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

good

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Foldable Phone Stand V2 by Pork3D.com

Pork3D

Lord of the Ring - The One Ring

Tobbse612

272

512

Support Free Scooper by Pork3D.com

Pork3D

Phone Stand Puck by Pork3D.com

Pork3D