Search models, users, collections, and posts
Tolerance Tester
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
51 min
1 plate
Open in Bambu Studio
Boost
1
1
0
0
2
0
Released
Description
This Tolerance Tester will test the fitting of pins and rods into holes with various tolerances. The holes (circles and squares) in the base are all dimensioned to have a maximum width/diameter of 0.35in. The rods that fit into them are dimensioned to be the following widths (loosest fit to tightest): 0.250in, 0.275in, 0.300in, 0.325in, 0.34in. Keep in mind that this is a pretty small print, so the first two tests may feel ‘really loose’, but could be great tolerances for larger parts that fit together.
I printed mine on my A1 Mini, with no AMS.
I used 6 prints:
Base.3mf
C1 and S1.3mf
C2 and S2.3mf
C3 and S3.3mf
C4 and S4.3mf
C5 and S5.3mf
Happy tolerancing!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)