Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x100mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.1mm and the Actual Depth is 1.9mm
Filaments Used:
PETG Creality Black Transmission Distance:
PETG Tpoimns Gray Transmission Distance:
PETG Creality White Transmission Distance:
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Gray
At layer #16 (1.36mm) swap to White for the rest.