Simple, very loud keychain whistle by Dominic

Dominic

Tools>Gadgets

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

18 min

1 plate

4.7(18)

Open in Bambu Studio

Boost

Released

Description

*Updated for better print quality and appearance. This is the first whistle I've ever made. I printed it for my dad to help get the dogs attention and it turned out to be one of the loudest I've ever used but it's very small and easy to print in PLA.

Comment & Rating (27)

@3DBuddy

Print Profile

0.16mm layer, 2 walls, 15% infill

No print problem here. LOUD little one! Bambu Textured PEI Plate Bambu PLA Basic Black

The designer has replied

@DominicFeldi

That's great! I'm glad to hear it works!

(Edited)

@bymafilip

Print Profile

0.16mm layer, 2 walls, 15% infill

First time the print failed

The designer has replied

@DominicFeldi

Alright, so I did print it again, in the new layer height, and it had no issue printing. To clarify I'm using an a1 mini with Elegoo rapid pla and the "generic fast" pla setting for the printer. I will edit the model to try and reduce artifacts regardless to see if that helps with printing on other machines.

@SuperSniffer1

Print Profile

0.16mm layer, 2 walls, 15% infill

Easy to print. Loud whistle. 👍

@dv.o_danonescu

Print Profile

0.16mm layer, 2 walls, 15% infill

printed without problem and the emitted sound is loud

@eenig3d

Print Profile

0.16mm layer, 2 walls, 15% infill

printed good. very loud !!

@mlodybuk

Print Profile

0.16mm layer, 2 walls, 15% infill

@user_3605092436

Print Profile

0.16mm layer, 2 walls, 15% infill

Other Issues

The designer has replied

@DominicFeldi

Can you describe them so I can look into fixes?

@user_3605092436

There were only problems with bed adhesion. The whistle works perfectly. I had to leave a review and the most I could give was three stars. great whistle!

@user_3605092436

Replying to @DominicFeldi :

my answer is to this question.

@kapa_rovno

Print Profile

0.16mm layer, 2 walls, 15% infill

@user_3062178563

Print Profile

0.16mm layer, 2 walls, 15% infill

needs to be longer

The designer has replied

@DominicFeldi

I have already printed longer versions including a few combined at different lengths to make a weird pan flute. The longer the chamber the lower the tone and I wanted this one to be extremely high pitched, that's why it's short.

@kurnitskiy

printed 6 different whistles with titles "loud whistle" and similar. surprisingly this one was loudest, despite its not big size. realy very loud, difficult to stand without ear protection.