They came. They saw. They pigged out

Abduction 2

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 130x230.89mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.1mm and the Actual Depth is 2.1mm

HueForge! Paint with filaments based on Transmission Distance

Swap Instructions:
Start with Black
At layer #11 (1.04mm) swap to Red
At layer #17 (1.52mm) swap to Gold (Yellow)
At layer #23 (2mm) swap to White for the rest.

Filaments Used:
PLA+ Inland Black Transmission Distance: 3
PLA+ Inland Red Transmission Distance: 3.6
PLA+ Inland Gold (Yellow) Transmission Distance: 8
PLA+ Inland White Transmission Distance: 2.5
This print uses 4 unique filaments