Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x133.33mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Orange Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA Generic White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #15 (1.28mm) swap to Orange
    At layer #20 (1.68mm) swap to Yellow
    At layer #24 (2mm) swap to White for the rest.