Kopp3D

cover

IMG_7386_f7fc9744-8014-4df7-a834-95f6033562c2.jpg

IMG_7388_76e4a41a-c675-4cf4-aee7-cfa2dc209a16.jpg

IMG_7385_ee403151-e702-4140-bee5-1f4c38d15acf.jpg

IMG_7387_dbf25a2d-837a-465f-9b24-a89ce5f5b816.jpg

plate_1.png

IMG_7389_5c413294-2bd5-4f70-8253-6f1edd2d858b.webp

Must have Arachne Wall Generator on for the mouth to print! If you just want the nose and not the mouth turn off Arachne.Seam position back.4mm nozzle with 0.12mm layer, 4 walls, 15% infill&nbsp;&nbsp;You can use adaptive to make it better quality but it adds an whole hour so I wouldn&#39;t recommend it if you&#39;re just printing as a toy.&nbsp;&nbsp;

Cat in black and white

1 x Tiny Cute Cat with Keyring Hole

Matite

2024-09-07_4020564018d4

Tiny_Cute_Cat_Simplied_and_Edited_Side_View_Close_Up_Horizontal.jpg

Tiny_Cute_Cat_Simplied_and_Edited_Side_View_Horizontal.jpg

Tiny_Cute_Cat_Simplied_and_Edited_Top_View_Horizontal.jpg

Tiny_Cute_Cat_Simplied_and_Edited_Keyring_and_Hole_.jpg

This is the same as the authors original cute cat model except for the changes I made which are outlined below:<ul><li>Simplified the geometry without losing the important details.</li><li>Used Autodesk Mudbox to sculpt out the imperfections that were caused by the 3D scanning process.</li><li>Some minor editing was done to the added geometry parts for the mouth to ensure they print correctly even when using a 0.2mm “Standard” layer height profile (which prints faster at the expense of less detail).</li><li>Added a negative cylinder part for a 2mm diameter keyring hole in the tail area. This means you can easily change the hole size to what you desire, move it to another location or even remove it entirely if you do not wish to have a keyring hole.</li><li>Moved the entire model assembly down a bit into the plate to easily remove the 3D scanning imperfections at the bottom of the model where it sits on the plate.</li></ul>The print profile is as follows:<ul><li>Suitable for AMS (using 3 colours - white, black and pink).</li><li>0.12mm layer height “Fine” mode.</li><li>No support or brim necessary.</li><li>All other settings are default.</li></ul>Filaments used for this print were:<ul><li>Bambu Lab PLA Basic Jade White</li><li>Bambu Lab PLA Basic Black</li><li>CC3D PLA Max Pink</li></ul>This was tested and printed without any issues and as you can see it looks awesome. Please credit the original author. Give them a boost if you can!

Simplified and Imperfections Removed then Added Keyring Hole

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

A tiny cute cat laying on its&#39; back. Made using a 3D scan of a Squishies cat. Must have Arachne Wall Generator on for the mouth to print! If you just want the nose and not the mouth turn off Arachne. You can also use adaptive layers to make it better quality but it adds an whole hour so I wouldn&#39;t recommend it if you&#39;re just printing as a toy.&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Give this a boost if you want us to continue making new designs!</boostcontent></boostme>Designer: Anna

Tiny Cute Cat 

ASIA

Print Profile(2)

Description

Comment & Rating (90)

License

Related Models