This is a Hueforge of the first level as seen in the second episode of the netflix tv show : 3 body problem.
Instruction for manual swaps :
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x76.76mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA PolyTerra Army Blue Transmission Distance: 0.1
PLA BambuLab Basic Blue Transmission Distance: 2.3
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Cyan Transmission Distance: 1.7
PLA BambuLab Matte Ice Blue Transmission Distance: 1.9
PLA BambuLab Basic Jade White Transmission Distance: 3.4
This print uses 7 unique filaments
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Army Blue
At layer #11 (0.96mm) swap to Blue
At layer #12 (1.04mm) swap to Marine Blue
At layer #13 (1.12mm) swap to Cyan
At layer #14 (1.2mm) swap to Ice Blue
At layer #17 (1.44mm) swap to Jade White for the rest.
Happy printing !