WD40防喷溅套装（ WD40 Anti Splash Tool by 涵（Han）

涵（Han）

3D Printer>3D Printer Accessories

In Contest

0.2mm nozzle Design Challenge

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.4 nozzel (0.4喷嘴)0.1mm layer, 2 walls, 70% infill

Designer

21 min

1 plate

4.3(3)

0.2mm nozzle, 0.1mm layer, 4 walls, 70% infill

Designer

28 min

1 plate

5.0(1)

Diameter of wd40 nozzle 2.75 mm

Designer

29 min

1 plate

5.0(1)

Boost

142

123

Released

Description

WD40防喷溅套装（WD40Splash proof set）

全封闭防喷溅套件，最大限度的较少WD40喷涂时的雾状喷溅，因为是全封闭套环，可避免手抖动时远离丝杆，润滑油脂喷溅到机箱的情景发生。

（This fully enclosed anti-splash tool is designed to minimize splashing when applying WD-40 to the z-rods. It ensures that WD-40 doesn't spray onto the chassis walls if the spray can's straw isn't precisely aimed at the z-rods.）

Comment & Rating (24)

@Dierenwinkel

WD40 IS NOT A LUBRICANT!! Use the lubercating grease on Bambu's website ;)

The designer has replied

@user_1800386801

WD40 is a series of products, and white lithium grease is used in the picture. Even without using this grease, the kit can still be used as a precision electrical cleaner for WD40

@flashtu1980

yes there are many wd40. i use the one with Teflon (ptfe) in it because it doesnt pull humidity.

@Dierenwinkel

Replying to @user_1800386801 :

Forgive my ignorance, I'm sorry. Thanks for clarifying!

@c_cobra

Print Profile

0.4 nozzel (0.4喷嘴)0.1mm layer, 2 walls, 70% infill

The designer has replied

@user_1800386801

Thanks!

@Rsmyth166

Boosted

Print Profile

0.4 nozzel (0.4喷嘴)0.1mm layer, 2 walls, 70% infill

didnt fit my wd40 can so neede to be scaled up

The designer has replied

@Rsmyth166

Boosted

Replying to @user_1800386801 :

Hi its 2.75MM by my calipers

@user_1800386801

Replying to @Rsmyth166 :

The printing configuration suitable for the nozzle outer diameter of 2.75mm has been uploaded. You can adapt it after printing. If there are any problems, let me know

@Rsmyth166

Boosted

Replying to @user_1800386801 :

great thank you

@user_1917861806

DO NOT USE WD40 TO LIBRICATE ANYTHING

The designer has replied

@BenjDavidson90

Why ? They make lithium grease which seems to be good for this.

@user_1800386801

Thank you for your reminder. However, in my pictures, I was applying WD40 white lithium grease that is "ideal for metal-to-metal applications that require heavy-duty lubrication and protection against rust and corrosion" to lubricate my Z rods. My anti-splash tool is also compatible with regular WD40 which can remove dust from Z rods.