Regalo para el dia de la madre del tradicional gnomo.usando hueforge para su creacion
Hay dos stl una de ellos con el archivo como veis en la foto, en el otro para un cuadro con el fondo blanco de 200x200
Gift for mother's day of the traditional gnome. Using hueforge for its creation
There are two stls, one of them with the file as you see in the photo, the other for a painting with a white background of 200x200
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA smartfil negro Transmission Distance: 0.4
PLA smartfil pink Transmission Distance: 7.4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA smatfil White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with negro
At layer #6 (0.56mm) swap to pink
At layer #16 (1.36mm) swap to Blue Gray
At layer #19 (1.6mm) swap to White for the rest.