Pasta drying stand with six arms by user_1650298007

user_1650298007

Household>Other House Models

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

6.4 h

2 plates

3.0(2)

Boost

Released

Description

When you make your own pasta you have to dry it, this thing will help with that.
There are several parts that have to be assembled after printing:
1. the mast (Droogmolen mast (1)) is in two parts they must be assembled, some glue is advised

2. The top of the pasta dryer (Droogmolen top (1) must be assembled to the mast, some glue is advised

3. The foot (droogmolen voet(2) must be assembled to the other side of the mast, some glue is advised

4. The foot extenders (voetverlenger (1)) must be placed over the small feet for better stability, some glue is advised

5. The arms (droogmolen armen) fit in the holes of the top, some glue is advised

Bon apetit!

pasta

Comment & Rating (9)

@Ollie13

Print Profile

0.16mm layer, 2 walls, 15% infill

Tried several times and always failed in the same spot.

The designer has replied

@user_1650298007

where did it fail?

@Ollie13

Replying to @user_1650298007 :

Always at the beginnning of the first plate, maybe 10 minutes in.

@user_1650298007

Replying to @Ollie13 :

It worked fine with me. Maybe you can try to print every part of the first plate apart. This can be done by selecting the arms and then press the button with the papers with the "O" in it. and deleting all the arms but one and then print that plate 6 times. You also should download the file before doing this, as one part was missing in the original file. I hope this will help, let me know!

@thierry.tettama

Hello everyone There is one piece missing from the printout. It's the piece at the top that links all the little branches together. It would be great if you could add the piece

The designer has replied

@user_1650298007

Thanks for telling this, I've added the part in the file and reuploaded the new part, hope it will work. You can also download the STL files and use the part from there!

@thierry.tettama

bonjour il manque la pièce du haut pour maintenir les branches pourriez-vous la fournir

The designer has replied

@user_1650298007

The missing part can be found in the STL files or in the newly uploaded file!