Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JustMaker Brown Transmission Distance: 1.5
PETG Sunlu Red Transmission Distance: 7.5
PETG TPOIMNS Yellow Transmission Distance: 6.5
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Brown
At layer #10 (0.88mm) swap to Red
At layer #15 (1.28mm) swap to Yellow
At layer #20 (1.68mm) swap to White for the rest.