Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x204.41mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA Elegoo Blue Transmission Distance: 2.7
PLA Polylite Starlight Nebula Transmission Distance: 2.9
PLA PolyLite Pro Magenta Transmission Distance: 1
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA Overture Matte White Transmission Distance: 3.7
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to BambuLab Green
At layer #10 (0.88mm) swap to Blue
At layer #12 (1.04mm) swap to Starlight Nebula
At layer #15 (1.28mm) swap to Magenta
At layer #17 (1.44mm) swap to Sunrise Orange
At layer #20 (1.68mm) swap to White for the rest.
If you would like my work and interested in donating to the filament fund, or would want to have something special made, feel free to drop a donation or join my patreon for early access and request priority prints.
https://www.patreon.com/sblayeredcreations