This is a printable model for the Original Prusa Enclosure with the buffer of MMU2S/MMU3.

How to print

Use the default Prusa Slic3r Settings for PETG or ABS/ASA. No supports required. Printed with layer 0.2.

Parts to print

To use this model you have to print the following items:

• 1 unit of this model.
• 4 units of this model: https://www.printables.com/es/model/634210-mmu3-short-buffer-holder

Assembly

1. Reemplace 2 upper Plate Holder with 2 Short Buffer Holder provided by the user @Collin_686284
2. Install the nuts on the adapter.
3. Remove the two upper Plate Holders and two bottom Plate Holders from the buffer.
4. Install the 4 units of Short Buffer Holder provided by the user @Collin_686284 and attach the adapter provided at this design. Fix all parts of the buffer using the same screws.
5. Install the buffer with the new parts and adapter on the Original Prusa Enclosure.

Credits and thanks

Thanks to @Collin_686284 for the part. If you like this desing, please give me a like and publish your print! Thanks! ;)