Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 114.39x199.1mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.5mm and the Actual Depth is 1.9mm

Filaments Used:
eSUN Filamento PLA Black MateTransmission Distance: 0.3
MMOBIEL 3D Printer PLA Red Transmission Distance: 4.5
StanceMagic White Transmission Distance: 6
This print uses 3 unique filaments but you can only use white and black if you prefer.

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #12 (1.04mm) swap to White for the rest.