Modell created with Hueforge. First model i made and first contribution to Makerworld
My goal was to be inspired by the original painting and use common colors to create an artistic adaptation
AMS is not needed, but it does make it easier
Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA MATTE Sunlu Matte Black Transmission Distance: 5
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ eSUN Yellow Transmission Distance: 5
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Matte Black
At layer #7 (0.72mm) swap to Blue
At layer #11 (1.04mm) swap to Yellow
At layer #16 (1.44mm) swap to Ivory White for the rest.