KitchenAid Attachments Holder by Hart 3D Prints

Hart 3D Prints

Household>Other House Models

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

4.6(14)

Updated, All printers, 0.2mm layer, 3 walls, 20% infill

1.4 h

1 plate

5.0(4)

[Fast+Strong] 0.24mm layer, 5 walls, 20% gyroid infill

1.2 h

1 plate

5.0(1)

Boost

248

436

192

197

Released

Description

LONGER VERSION ADDED!!

Small and impact organizer that is very useful for baking. To put on cabinet or wall use command strips if it is going to be used for short time and if it is going to most likely going to stay on the wall or cabinet for a long time glue.

Printing tips

Print with supports I would use tree or organic supports for easier cleanup
print above 15% infill

This is also perfect for a Mother’s Day gift!

Comment & Rating (35)

@Pertneer

Print Profile

0.2mm layer, 2 walls, 15% infill

2 of the pins are not fully attached to the three uprights.

The designer has replied

@Laine

Maybe your Printer messed it up because Everyone else worked fine

(Edited)

@Pertneer

Replying to @Laine :

Nope, If you zoom in close enough you can see it in in the model.

(Edited)

@Laine

Replying to @Pertneer :

Yea I'll have to fix that

(Edited)

@user_571455250

Print Profile

0.2mm layer, 2 walls, 15% infill

it printed extremely well. The two tone is what happens when you forget to check your AMS, but I kind of liked the look. only suggestion would be spacing out the mounts another 10 mm. it's very compact. This is handy if space is at a premium.

The designer has replied

@Laine

Ok that is very useful thank you

@FedeNessi

Print Profile

Updated, All printers, 0.2mm layer, 3 walls, 20% infill

excellent

@Lumixia

Print Profile

0.2mm layer, 2 walls, 15% infill

the notches are not properly connected.

The designer has replied

@Laine

I fixed that a while back and on my slicer it is fine, and it printed fine for me

@Allomancer

Print Profile

Updated, All printers, 0.2mm layer, 3 walls, 20% infill

works great, they are a little close together but still managable

@EthanB37

Fits the KitchenAid tools perfectly! Wish I had red filament to match my mixer though. I used two command strips, one on each end, to attach this to the top of my cabinet. I also added a print profile that can be printed on any bambu printer for future users!