Summary

IMPORTANT NOTE: Make sure that the Accelerometer is slided as far away from the print head mounting bracket as the slot on the print head cover allows, so that the Dupont connectors can clear the X Axis stepper motor shroud (I learned this the hard way!).

This is a mount for a ADXL345 Accelerometer to mount onto your CR10S' print head.
In addition to the printed part, you will need 2 M3 hex nuts and 2 M3x10 socket head cap screws. Assemble as shown in picture. You will want to unbolt your print head cover to mount it. Print at 100% infill.

Link to Y axis mount shown in picture: https://www.thingiverse.com/thing:6596493

Link to good guide for Klipper Input Shaper Instructions: https://obico.io/blog/klipper-input-shaping-ender-3/