These coasters are 89x89mm and 3.5mm in thickness.

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 5
PLA BambuLab Matte Ivory White Transmission Distance: 3.6

-If you do not have an AMS, just manually swap out the filament spools at the right layer (adding a pause in the slicer where you would change colors)

-Do NOT adjust the size in your slicer!! The layers will not come out right.

-Do not change the size, this will cause errors in color change compromising the entire print.
-Use my print profile or you will not get the desired results.
-It can be printed safely without AMS and on any printer.

-To get the same outcome as the print I have shown. You need to use the same filaments that I have listed. Each filament has different "density" or transmission distance that allows light to shine through to the filament underneath the top. So if you use a different brand or type, it might not have the same effect as if you did it with the exact same color and filament. Nonetheless give it a shot and leave a picture of your print if you wish to run it anyway. Id love to see the outcome from different brands and types to see how it turns out as well!

-Please leave me a thumbs up if you love the print!!