Calvin and Hobbes - Playing Poker

My other Comic Strips can be found here:

https://makerworld.com/@CanadianGamer/collections/810621

-----------------------------------

If you're looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available: https://www.patreon.com/CanadianGamer3DPrintsEDM

In my print profile I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

— Printing Instructions---

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x187.5mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 1.6mm and the Actual Depth is 1.6mm

Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Generic Black Transmission Distance: 0.2
This print uses 2 unique filaments

Swap Instructions:
Start with Jade White
At layer #11 (0.96mm) swap to Black for the rest.