Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 106.67x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.8mm and the Actual Depth is 2.9mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Gray
At layer #25 (2.08mm) swap to Jade White
At layer #33 (2.72mm) swap to Red for the rest.